- Posts
- 9,105
- Location
- Roaming the UK on assignments
Proper getting there now mate, the beer should be mopped up with a special order from Dominoes, you deserve it 
Steep learning curve
- Thread starter resto_d1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
About to go for an IndianProper getting there now mate, the beer should be mopped up with a special order from Dominoes, you deserve it
yeah cheers feels like it is now. That rear bit annoyed me but I know now to just leave things like that n come back. Isn't going anywhere. It's the wriggling underneath and holding yourself up with your core that's the hardest bit of all. I've entered a new area of the chassis now as hadn't visited trailing arm brackets yet haha. I really hope the front isn't as bad as the rear lol
Chrisw8
Well-Known Member
- Posts
- 1,997
- Location
- Top of the Hill
You can borrow mine if you want to. If you can pick them up .
Cheers do you know how did they are when closed?
Open to opinions but discovered today that there are 2mm plates behind the outer vent surround these are to support the bonnet brackets pictured. I'm thinking I'll very carefully cut along my vent tie in line (the gutter), removing the skin but leaving the 2mm in place. I'll then somehow tie the 2mm back in to the inner bulkhead. Surely someone has come across this before?
Patience, g clamps and a rubber mallet were the key today. Looks like I'm just about lining up. Despite keeping a 5mm plate clamped to my work area I still warped the metal and had to clamp and beat and fiddle to get straight. I'll test fit against the windscreen and doors once I've tacked. If I'm out I'll just break the tasks then.
Patience, g clamps and a rubber mallet were the key today. Looks like I'm just about lining up. Despite keeping a 5mm plate clamped to my work area I still warped the metal and had to clamp and beat and fiddle to get straight. I'll test fit against the windscreen and doors once I've tacked. If I'm out I'll just break the tasks then.
Chrisw8
Well-Known Member
- Posts
- 1,997
- Location
- Top of the Hill
They’re down my mums. I think they are about 5foot or so.
If I still got the details on my eBay buys, I’ll see if it says on there.
Cheers. I'd have to get a lad to grab them as got a coupe!
Chrisw8
Well-Known Member
- Posts
- 1,997
- Location
- Top of the Hill
just checked ebay ..... they're size 0 ..... 1.04m closed.
Pm me if you want to borrow them.
Pm me if you want to borrow them.
Awesome I'll pm when ready to do it as the costs are crazy at the moment. Might not be for a couple months!
Thanks
Chrisw8
Well-Known Member
- Posts
- 1,997
- Location
- Top of the Hill
No worries... hope to get back on mine when it warms up a bit !!
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Yoga (((snigger)))
I'm just waiting for a day that it's not pizzing rain or blowing a gale
- Posts
- 83,310
- Location
- Embasinga stocæ
One has to say that this time of year is not very conducive to getting the iggery on
- Posts
- 9,105
- Location
- Roaming the UK on assignments
This time last year we were getting snowed off an i was outside fitting boost an oil pressure gauges along with the voltmeterOne has to say that this time of year is not very conducive to getting the iggery on
photos in my fred showing ice an snow everywhere lolI will be working on both these come rain or shine as if I'm rained off the disco I can get on defender. I will also be working my arse off at work so that I can go down to the farms neighbour and make an offer for their s3 pickup haha
- Posts
- 83,310
- Location
- Embasinga stocæ
Masochist!
I miss physical graft for some reason. When I do a good days graft on motor I get a good sense of gratification.
- Posts
- 83,310
- Location
- Embasinga stocæ
i get cold
If I get cold to the bone I'm ****ed and know to go in. Feet is biggest thing for me. The barn is windy too but I've found a little burner to use to try and keep it a tad warmer.i get cold
