martyn01
New Member
- Posts
- 10
- Location
- Medway Kent
Hi, new to this so bear with me and treat me gently
300Tdi Def 110 ocasionally will not start, usually after a run, glow light works, turn key and nothing.
I have traced the fault to a black box within the battery compartment, drilled the rivets off and located a faulty printed circuit board within. It is a Lucas part with the No 5387-2742B stamped on it, I belive it is linked to the immobilliser/ alarm system.
If I short out the NEC microswitch on the board it will start fine.
Anyone know where I can source a replacement PCB from ?
300Tdi Def 110 ocasionally will not start, usually after a run, glow light works, turn key and nothing.
I have traced the fault to a black box within the battery compartment, drilled the rivets off and located a faulty printed circuit board within. It is a Lucas part with the No 5387-2742B stamped on it, I belive it is linked to the immobilliser/ alarm system.
If I short out the NEC microswitch on the board it will start fine.
Anyone know where I can source a replacement PCB from ?