Starter solenoid replacement question?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

busagsx1300

Active Member
Posts
167
Location
Under my disco with a rain mac!
Can anyone tell me if you can replace the solenoid on the Bosche 5009 starter?
It has UN19-10 sticker on the it when you take it off the starter motor.
I can only find info on earlier models but not this one.
Its on my 1997 disco deasesal, which is now stuck!
Or will a TD5 starter be ok to put on as thay are the only one's i can get locally today from the breakers?
Any advise would be gladly received ( and before someone says get rid of it, i still need to get it started!)
Thanks
 
Hi, just a word of warning, I replaced the starter solenoid on my 98 300TDI, the new item fitted ok and worked fine, that is until the engine got hot, then the car would not start. After much investigation I found that the new solenoid was getting hot and the center push rod was jamming in the barrel. Lesson is that although they may fit, they may not do the job! Sorry I can not give part numbers.
 
Thanks for the reply Snowman, I would have thought someone would have the info but obviously not!
Managed to get hold of a second hand one that I'm picking up tonight, will keep trying to sort out the old one!
 
Back
Top