hi ,is there any way of reseting the srs warning light it came on after i took the wrong 10 amp fuse out . a mate who is a mechanic has tried with a diognostic machine (snap on) without any luck . i have heard of a fix using a paper clip but i am not sure any help please.
srs light
- Thread starter arv
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Have you tried disconnecting the battery for 5 minutes?
Also will help if you say which Disco it is? D1, D2 etc.
Cheers
Also will help if you say which Disco it is? D1, D2 etc.
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
iirc , someone mentioned before that the connections under the seat can cause this .
Have you moved the seat recently?
Other option is get it on diagnostics and see if that gives you any clues.
Cheers
Have you moved the seat recently?
Other option is get it on diagnostics and see if that gives you any clues.
Cheers
sierrafery
Well-Known Member
- Posts
- 17,164
- Location
- Arad/Romania
Dedicated diagnostic tool is needed for that ... if a good fuse was refitted the warning should be out if that was the cause, IMO it's not related cos the SRS has volatile memory, the warning stays on only untill a fault is present if the fault is gone the warning should go off
brian47
Well-Known Member
- Posts
- 8,867
Blade type fuse holders aren't the most reliable kind on the market, they can and do deteriorate over time. Check not only that the fuse you replaced is a good one, but also that the fuse holder's flat sockets are clean, tight and properly connected.
sierrafery
Well-Known Member
- Posts
- 17,164
- Location
- Arad/Romania
If no joy better explain which particular fuse did you remove and why maybe we find an explanation
