I have recently changed the blend motors on my 1997 P38 4.0 (what a horrible job!!! and the hot air distribution is still problematic working:screaming_bug_eye_f sometimes and not others. I guess the second hand blend motors I fitted are also suspect!).
However I now have a fault code showing with the SRS warning light lit reading airbag fault.
I have taken the car to my local 4x4 garage and they put it on the computer and found the airbag was reading an open ciruit hence the fault. I have since checked the wires to see if I have dislodged somthing but cannot see anything obvious.
Can someone advise me of what checks to carry out to remove this fault.
However I now have a fault code showing with the SRS warning light lit reading airbag fault.
I have taken the car to my local 4x4 garage and they put it on the computer and found the airbag was reading an open ciruit hence the fault. I have since checked the wires to see if I have dislodged somthing but cannot see anything obvious.
Can someone advise me of what checks to carry out to remove this fault.