Spotlights to full beam?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
K

kevin cottrell

New Member
Posts
48
im wiring to front spotlights to my 96 disco 300tdi auto but need some advice on which wire i need to attach the spotlights wire to for them to work when the the full beam is switched on? ive wired the spots thro a inline fuse(20amp) to a relay, point 87,both spots earthed to body and relay point 85 earthed to same point, relay point 30 i will connect straight to battery, but im stuck on where to wire relay point 86 which is supposed to connect or join the headlight wire that is for full beam but i havnt a clue which wire to look for or what colour it is?? :confused: any help much appreciated
 
not havin a larf,just not that good with electrics,is there a easier way eg colour of wire? wouldnt know how to test lights using volt meter anyway lol im good at following drawings or diagrams but after that im clueless
 
thats maplins for ya , looks like i got to learn how to meter test tomorrow then seein as no one has come up with a coloured wire to hack into :eek:
 
you don't need a multi meter you can use a test light, pull the connector off of the bulb, attach one wire from a good earth (batt - is very good lol) then put the headlights on main beam (hi beam if you will) and test each one in turn as dip beam isn't used when main is on (apart from the pass/flash function) only one wire will be live and that one is the one you want
 
You must log in or register to reply here.

Similar threads

S
Led light bar wiring (range rover sport l494 sdv6 2015)
Replies
10
Views
244
Skelo
S
Cornishdefender
Fuse blowing - fuel gauge, temp gauge, indicators (not hazards) full beam (not flashing)
Replies
13
Views
443
bluedog333
bluedog333
Jazydave
Blower fans
Replies
12
Views
454
Datatek
Datatek
A
Combusting wires - one big FUBAR
Replies
7
Views
595
amsthenovice
A
C
Electric fan wiring
Replies
5
Views
513
dag019
dag019
Back
Top