zojdson
New Member
- Posts
- 45
- Location
- Temse, Belgium
what diameter should my snorkel have so the 200tdi wont have any trouble breathing? thx
snorkel diameter
- Thread starter zojdson
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
if you buy a snorkel to fit all this would have been thought out by the manufacturer
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
err - that's hooge!As long as it's the same diameter or greater than the intake pipes from your air filter it will be fine. Roughley 3 1/2" I thinkno harm being slightly bigger though.
the pipe from the air box to the wing vent is 2 1/4" so that size or bigger.
I used 2 1/2" drainpipe for mine.
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
what did you use for the outer wing and how did you seal it?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
I have one of them safariiiiii ones (not sure it looks that pretty but it came with the truck).
Anyway i agree that the inner wing pipes afair does seem rather a poor setup....
....perhaps i should gey a length of that flexi hose you've used.
gonna try that bag test in a bit - not holding my breath though
Anyway i agree that the inner wing pipes afair does seem rather a poor setup....
....perhaps i should gey a length of that flexi hose you've used.
gonna try that bag test in a bit - not holding my breath though
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
ive done same as trewy on both mi 90s and works fine
