Series 3 Smiths Oil Pressure Guage Electrical

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
steve2286w said:
Yikes that’s a bit expensive , if you scroll down in that eBay page you see intermotor ones fir £30
Click to expand...
Thanks will that fit on a 2.25 diesel and give the correct readings? I assume i would also need to maintain the old switch to activate the light on the dash as well?

Thanks
Richard
 
Not sure , but you could ring them, this looks like it’s suited to your gauge

www.ebay.co.uk

Smiths Oil Pressure Sender For Classic Gauge Race Rally | eBay

For Smiths Classic Gauges. These oil pressure gauge senders are suitable for use with the Smiths electrical oil pressure gauges. SMITHS GAUGES . 1/8 NPT Thread. Not always. as you may require it in the event of a claim with your carrier.
www.ebay.co.uk

Holden do gauges, transmitters and adapters.

On mine I fitted a T piece adapter where the sender goes in , to use a mechanical oil gauge and keeping the switch to operate light
 
Guys just to let you all know, I have found a Smiths oil pressure gauge on eBay for £20 so once I receive it and test it I will let you all know how I get on.

Many Thanks
Richard
 
You must log in or register to reply here.

Similar threads

Andy Warren
Disco 2 ATC illumination
Replies
3
Views
534
Andy Warren
Andy Warren
Bushcrusher
Any body fitted the electrical guages for oil temp,pressure and water temp?
Replies
8
Views
760
Bushcrusher
Bushcrusher
sierrafery
Cheap fuel pressure check
Replies
11
Views
1K
Mark Ormond
M
R
Freelander 1 Do low pressure fuel pumps play a big role on starting car?
Replies
7
Views
1K
Nodge68
Nodge68
aaronmorris
Aftermarket gauges. Oil pressure/water temp
2
Replies
28
Views
6K
trax
trax
Back
Top