Sill Guards

Andy J · Nov 10, 2020

Hi the time has come to fabricate sill, rock, tree guards I was going to use 75x50x4mm box with some sort of tubing to finish these are not for steeps but to protect the bottom of the doors and lower body work any suggestions or pictures would be very helpful Cheers.

v8250 · Nov 10, 2020

whu not try here https://dixonfabrication.co.uk/index.php?route=product/category&path=89_106 they're superbly priced compared to many other suppliers and can't imagine they can be made at a lower cost to same quality - have a set on my 90, they're very good https://dixonfabrication.co.uk/DEFENDER-90-ROCK-SLIDERS-

ronsealdeath · Nov 10, 2020

+1 they are good

Andy J · Nov 10, 2020

Hi the problem is I have a Designa chassis with the bulkhead out riggers in front of the bulkhead feet so I don't think of the shelf ones would fit.

v8250 · Nov 10, 2020

Andy J said:
Hi the problem is I have a Designa chassis with the bulkhead out riggers in front of the bulkhead feet so I don't think of the shelf ones would fit.

Pah, wouldn't left that put me off - give Dixon Fab a call, you take the measurement, they make the modifications; afterall, they are Land Rover protection fabricators

Sill Guards

Andy J

Active Member

v8250

Well-Known Member

ronsealdeath

Sagging Member

Andy J

Active Member

v8250

Well-Known Member

Similar threads