side exit exhaust

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1361march

1361march

New Member
Posts
36
Location
Near carlisle,cumbria
Jus done ma side exit. Cost me nothing. had old disco front pipe used some bends from that and chopped up the rest of the exhaust.
What you think?
side exit.jpg

side exit hanger.jpg

side exit silencer.jpg
 
i made my side exit up today, out of bits of the old exhaust system i replaced a few months ago, as i ran out of MIG wire i used a small ark welder to make it up. Yes its on a disco but you get the idea
STA71319.jpg

STA71318.jpg

STA71321.jpg
 
Yes i used my little clarke mig the disco exhaust was fairly thick walled so was easy enough to weld.

looks well v8 disco!. So thats straight through now? With a nice v8 burble.
 
1361march said:
Yes i used my little clarke mig the disco exhaust was fairly thick walled so was easy enough to weld.

looks well v8 disco!. So thats straight through now? With a nice v8 burble.
Click to expand...

not yet, unfortunately mine has the 2 cats on the y pipe, and the centre box, im still thinking of a way to get it past the MOT but without them :doh:
 
V8_Disco said:
not yet, unfortunately mine has the 2 cats on the y pipe, and the centre box, im still thinking of a way to get it past the MOT but without them :doh:
Click to expand...

get the tester too wear some ear muffs and stick the emissions tester up a corsa exhaust :D
 
You must log in or register to reply here.

Similar threads

Mack1
New to landy zone
Replies
6
Views
809
brianp38dse
brianp38dse
R
1987 90 NA to 200tdi
Replies
11
Views
2K
dag019
dag019
RustyDefender
Part numbers for this exhaust? (90)
Replies
17
Views
1K
RustyDefender
RustyDefender
kevstar
D1 200tdi lt77 & transfer box n bits
2
Replies
22
Views
2K
kevstar
kevstar
D
What IS this noise ?
Replies
12
Views
2K
dogdog1
D
Back
Top