Shoulder belts in a Series?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

Gord Wedman

Well-Known Member
Posts
617
Location
Chilliwack, British Columbia
[/GALLERY]On YouTube I have seen a couple of Series Rovers with modern shoulder belts. Can't figure out how the upper anchor point is attached. In the photo you can see the set up. On the outside of this vehicle no bolt or rivets could be seen. Anyone added these type seatbelts?

PS: How do you add a photo from your computer? Upload file does not seem to show anything.
 
Last edited:
images
 
The part name is hardtop corner bracket. You'll find the right hand bracket here and the left hand bracket here. The seat belts (inertia) are to be found here. That's for the hard top, but as previously mentioned, the truck cab mountings are different.

My truck cab had no belts when I bought it, but it came with all the stuff needed (read: bolts in the chassis), so all I had to do was to get the inertia belt and put it in. If you have a truck cab, there might be a label under the steering wheel (or on the passenger side) indicating the car has the mountings required.
 
You must log in or register to reply here.

Similar threads

N
Seat belts in a Series 3.
Replies
6
Views
4K
rob1miles
R
Bobsticle
Buying a series ?
Replies
7
Views
1K
Hd1966
Hd1966
Tomushh
exRAF Land Rover Series IIA 109 2.25 Diesel
2
Replies
35
Views
6K
LUKBENPHI
LUKBENPHI
pontyslapper
Gathering the history of your Series
Replies
6
Views
1K
Bobsticle
Bobsticle
mrchurchill109
Mounting seat belts in a Series I?
Replies
0
Views
570
mrchurchill109
mrchurchill109
Back
Top