Redwingback
Active Member
- Posts
- 870
- Location
- Sussex
Should I be overly worried ?
- Thread starter Redwingback
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
HYBRIDNI
Active Member
- Posts
- 335
- Location
- Sunny Northern Ireland
I would personally knock any rot on the head immediately before it creeps into other areas. Can't see clearly in PIC so just general statement but hard learned lesson for me in previous times.
Redwingback
Active Member
- Posts
- 870
- Location
- Sussex
Cheers, will get it sorted as soon as I can, was just worried it maybe in a vulnerable place.
- Posts
- 11,020
- Location
- North of the Wall
Can't see the hole. 
If it's in the chassis or outrigger, get it sorted ASAP.
More info would be useful.
If it's in the chassis or outrigger, get it sorted ASAP.More info would be useful.
Redwingback
Active Member
- Posts
- 870
- Location
- Sussex
Yeah, sorry took photo in the dark, bit unclear, hole is dark patch in centre of photo. Was taken looking in from behind rear wheel into arch, not sure if it's an outrigger or a body support.
- Posts
- 11,020
- Location
- North of the Wall
Have I found the culprit?
Redwingback
Active Member
- Posts
- 870
- Location
- Sussex
Have I found the culprit?
Number two's your man, everything else is good still.
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
As Already been said, Get it cut out and plated, then spray some waxoil/ dintrinol in chassis cavity. It wont cure itself or get smaller by ignoring it im afraid. When you start tapping around there it will prob get bigger. Look also in same spot but opposite side.
When you start tapping around there it will prob get bigger. Look also in same spot but opposite side.
Redwingback
Active Member
- Posts
- 870
- Location
- Sussex
Yeah, will plate it, have checked other side and all around, chassis is all good everywhere else. Do you know if it's the DEFENDER 110 CENTRE BODY CROSSMEMBER - LR542 / NRC4171 (sorry for caps, pasted in from website)?? And if so I guess to replace it would mean tub off ?
Redwingback
Active Member
- Posts
- 870
- Location
- Sussex
Ignore part numbers, utterly wrong !!
