Series 3 Shot blast

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

catman275

Well-Known Member
Full Member
Posts
351
Location
Poole Dorset
Just got my repaired bulkhead back from being shotted. Including Rad panel and Apron, radiator surround, and inner sills. £132 including vat. I'll give it a once over then off for the galving for the bulkhead and rad panel.
 
i worked in industry and the term used in the fab was shotted. Shot this, shot that. Hard to stop using a term that you used for 40 years.
 
As promised PICCIES :D
A few of during work and after completion and after the SHOTTING:rolleyes:.
The last one is of beneath the water drain channel, not seen until after. It is double skinned so I may just leave it and fill with a bit of seam sealant.
 

Attachments

  • IMG_1341.JPG
    IMG_1341.JPG
    309.8 KB · Views: 106
  • IMG_1367.JPG
    IMG_1367.JPG
    272.5 KB · Views: 129
  • IMG_1374.JPG
    IMG_1374.JPG
    188.5 KB · Views: 90
  • IMG_1384.JPG
    IMG_1384.JPG
    298.8 KB · Views: 113
  • IMG_1385.JPG
    IMG_1385.JPG
    278.7 KB · Views: 86
  • IMG_1386.JPG
    IMG_1386.JPG
    241.7 KB · Views: 119
  • IMG_1438.JPG
    IMG_1438.JPG
    260.9 KB · Views: 87
  • IMG_1444.JPG
    IMG_1444.JPG
    298.9 KB · Views: 104
  • IMG_1490.JPG
    IMG_1490.JPG
    395 KB · Views: 105
  • IMG_1500.JPG
    IMG_1500.JPG
    449.4 KB · Views: 142
  • IMG_1503.JPG
    IMG_1503.JPG
    260.2 KB · Views: 86
  • IMG_0887.JPG
    IMG_0887.JPG
    218.4 KB · Views: 123
  • IMG_1270.JPG
    IMG_1270.JPG
    241.8 KB · Views: 87
Back
Top