shake,rattle,wobble,judder, S**T, slow down

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lrb2 said:
zackly wot i said ..... got to be the motor not the wheel tyre combo ....
Click to expand...
I knew someone said summat along them lines earlier in the fred but con't be bothered to trawl through and find it...so cap off to yer LRB, fred duly altered to acknowledge me plagiarism!
 
odenne said:
But if they've been properly balanced on a proper machine then any wobbly with the wheels/tyres should show up on that! Either the balancing machine is iffy or the problem ain't with yer wheels, which might mean lookin at yer bearings, hubs, etc and the problem being accentuated by the different offset of your wheels.

Like wot LRB sed earlier
Click to expand...
ok cheers,gonna get a mechanic to ave a look and see what he thinks
cheers all
 
baggyjim said:
hi mate had prob after 110 parked up for 6 months tyres had gone oval due to lack of use , looked ok but couldnt drive in straight line ! how old are your tyres ? get them checked on wheel balance machine slowly rotated against a pointer
Click to expand...

I also rekon it is the tyres at fault. what tyres do you have fitted to em coz1? My guess is it's BFG all terrains. BFG all terrains are notorious for going doolally. I had to fit mine to the rear on my landy cos they rattled it to bits when fitted to the front. They will balance up fine but are crap to drive on.
 
ratty said:
I also rekon it is the tyres at fault. what tyres do you have fitted to em coz1? My guess is it's BFG all terrains. BFG all terrains are notorious for going doolally. I had to fit mine to the rear on my landy cos they rattled it to bits when fitted to the front. They will balance up fine but are crap to drive on.
Click to expand...
top 'o' the class Ratty, BFG allterrain 245/70/16
anybody wanna buy some tyres.
 
still cant find a deffinate answer off anyone
somebody mentioned taking a shim out of the swivel pins
would this cure it if the pins were causing the problems
how would i check if it was the pins?
 
finally sorted the bitch out,put new uj's on the front prop,nice smoothish ride now.
was told it is best to change uj's on both props at the same time,is this true?
only took me 2 weeks to do,not bad for me though.
if i have to do the others i should have it done by about september.
cheers for everyones help/advice
 
coz1 said:
finally sorted the bitch out,put new uj's on the front prop,nice smoothish ride now.
was told it is best to change uj's on both props at the same time,is this true?
only took me 2 weeks to do,not bad for me though.
if i have to do the others i should have it done by about september.
cheers for everyones help/advice
Click to expand...

i told ya it was propshafts .....:rolleyes: but did ya listen , ooooh no they never do ....
 
odenne said:
Oi, i sed it furst but was confossibefuddled by the side shot about it only happenin coz (COZ) you'd changed the wheels!!!
Click to expand...


go on spoil it fer me , he did'nt notice i never said it and thought i was fantastic till ya opened yer gob ....:mad:

some people ehh .... TUT....
 
You must log in or register to reply here.
Back
Top