CJ2a
Well-Known Member
- Posts
- 1,369
- Location
- the Bieszczady mountains of Poland
I have stretched the belt, I re timed it up all the marks spot on where they should be with a 10mm drill bit in the injector pump slot so it could not turn set everything and it ran on 3.5 cylinders and in 10 seconds I switched it off and had to evacuate the workshop bluddy unreal so I have definatly jumped a few cogs, I was going to play around with it to get it nice but needs a new belt end of I will only make it worse by trying to make it better