series hybrid

n.r.g97 · May 2, 2010

right now i have an old series 2a with a rotten chassis.... and i got offered a rangie chassis a while ago, i havent realy done much untill recently, heres a pic of it to give you an idea of what it is although most of its going to change anyway....

and these are pics of what ive done so far:

1.stripping the old one
2.starting the new one
3.cut&shut
4.different veiw

fanatic · May 2, 2010

don't mean to be rude but front 2 red oxide patches appear to not be strengthened where you have welded it

Grippa · May 2, 2010

He ain't wrong. Hope yer welding's tops, the chassis is totally as new and you know a good prayer for every time you hit a big bump!

gcoo8154 · May 2, 2010

where you have cut and shut it in the middle are you going to put for plates around it ie on on the top both sides and the bottom,

i know i would for a bit more strength anorl

n.r.g97 · May 2, 2010

they are now

we did think, about half way through the day (the pics are only of the morning and previous days) that it might be a good idea.... i might be 13 but im not completely stupid

well not much anyway and before anyone asks i didnt weld the chassis or the cage my dad did that, for obvious reasons

althought his welding is very good (its his job lol), we have also got the engine,gearbox and bulkhead on and the rollcage is on ready to be welded

90truckcab · May 2, 2010

ooh look scrapheap challange is back on ,

n.r.g97 · May 2, 2010

i know! isnt it great ive been thinking it would be great if they started it again

Grippa · May 2, 2010

If you (or yer ol' man) has stuck some additional plating on it, bollox, looks like jobs a good 'un.

& if yer 13, with a squeaky voice & you're taking on a project like that, fair play to you chap.

pornstarmax · May 4, 2010

Tractor tyres love em!!!!!!!!!!!!!!

n.r.g97 · Jun 14, 2010

hi everyone, sorry about the delay, been working on it quite a bit, got the engine box bolted in and props in, the engine and box sit quite a way back in the chassis, the gearbox is on the rangerover g-box mounts so the engine is moved right back the reason i have gone for this is because i havent had to modify the props and for better weight distribution. the bulkhead is bolted in place, the exhaust is manufactured and mounted, the radiator is in place so this saturday we will be doing the wings and rear, ive decided to trayback it, what do any of you think of traybacking it? does anyone have/know where i can get a series 2 grille?
thanks

stratie · Jun 14, 2010

I have an S11 grill, also sot a military grill that would look good on your hybrid. (the military grill is sat behind the S11 grill)

clivees · Jun 16, 2010

Hi NRG 97
Sorry for being a poo Pooper but you know you can’t register it as a 2a tax exempt.
http://www.landyzone.co.uk/lz/f38/exemption-vehicle-excise-duty-55330.html
It will have to go on a Q plate.

n.r.g97 · Jun 17, 2010

its never going on the road anyway

lol its offroad only

clivees · Jun 18, 2010

n.r.g97 said:
its never going on the road anyway lol its offroad only

Cool go for it

Its just some peps take the ****

Bump · Jun 18, 2010

clivees said:
Its just some peps take the ****

Yes they do

and the DVLA don't give a f**k about it either. (try emailing them about it)

n.r.g97 · Jun 18, 2010

I dont have the 2a docs anyway, technicaly its scrapped, however i do have the rangerover docs so if i were to put it on the road not on a q plate it wouldent be tax exempt so i wouldent gain anything, but like i say its not going on the road, i agree, peeps do take the ****

oxides · Jun 18, 2010

As an old fogey it's good to see young 'uns with a bit of gumption and go. Good project, great attitude, best of luck with it.

n.r.g97 · Jun 19, 2010

thanks

gonna try and post photo's...

n.r.g97 · Jun 19, 2010

n.r.g97 · Jul 20, 2010

right got a whole load more done, rear tub is cut down and on, rear x-member is on, cage is on, clutch is bled, steering is connected and ive made my rock sliders (bent and welded them myself! ) oh and the bonnet and grille are done, just need the mesh which ive baught off a friend and just need to pick it up next week and and!!!! wait for it... i got a coil sprung salibury rear axle for....£10! scrapyards are wonderfull things!
ive also decided on the colour scheme, landrover green with black cage and slders, fuel tank, chassis
ill get pics next time im at the workshop
N.R.G

series hybrid

Active Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

Well-Known Member

Active Member

Well-Known Member

Active Member

New Member

Active Member

Active Member

New Member

Attachments

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Similar threads