series 3 wont move in 2wd

landrovermilfer · Aug 12, 2009

i'm a disco man and i don't know much about them , i know even less about series 3 so am looking for some pointers , my next door neighbours series 3 1972 petrol engine , as he was changing gear there was a loud clunk and he lost forward motion and can only get forward motion in 4wd now. he was changing gear while slowing down to take a right turn if it makes any difference .
so does this sound familiar ? can anyone offer advice on what to check ?

thanks
paul

Paul D · Aug 12, 2009

Broken half-shaft at the rear?

Teflon · Aug 12, 2009

Paul D said:
Broken half-shaft at the rear?

Sounds likely; clunk, loss of drive to rear wheels, motion re-gained by engaging drive to fronts....... it's the 'classic' symptoms....

Paul D · Aug 12, 2009

Yup.

Could have added, possibly failed UJ, diff, propshaft, gearbox output shaft and maybe a whole host of others, but thought to start easily and obviously ...

... I had similar problem with my series way back ... did a load of stuff before checking the half-shafts ...

fanatic · Aug 12, 2009

half shaft

life is a constant journey with two possible destinations ...one is heaven the other is hell .... make your choice and accept jesus into your life today .

Jesus loves you-

scroll down

But I think you are a ****

pobby · Aug 12, 2009

if you get somebody to laydown beside the landie while trying to drive in 2wd and see if the rear prop still turn
if it turns but no forward movement then its something in the rear axle
if it dosnt turn at all then its gonna be gearbox or transferbox
my money is on the half shafts in the rear

landrovermilfer · Aug 13, 2009

ok thanks for your replies

series 3 wont move in 2wd

landrovermilfer

Active Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Teflon

New Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

pobby

New Member

landrovermilfer

Active Member

Similar threads