Series 3 suspension lift (diff angle issues)
- Thread starter series 3 spanner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Leonberger
Active Member
- Posts
- 361
- Location
- Near Potters Bar
Errrrrrrrrr ! Spyderman you forgot to say and it works . And is Unstopable LOL 
...............
L
...............L
That's for others to say.Errrrrrrrrr ! Spyderman you forgot to say and it works . And is Unstopable LOL
L
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
where do you get your 9.00s from? i cant find them
karlo
New Member
- Posts
- 84
- Location
- Swadlincote, South Derbyshire
matt-unsworth
New Member
- Posts
- 162
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Jesus H Christ! How to make a perfectly good motor look fekin ridiculous AND turn it into a death trap at the same time.
Some people deserve to own slittys.
Some people deserve to own slittys.
Thats the kinda motor I dream to have
fool
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
how to ruin a perfectly good series.....
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Hippy
Member
- Posts
- 25
- Location
- Hull / East Yorkshire
wow that does look good !
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
just wait till stazi bob sees that ! unisured for the mods, dangerous mods, speeding, emmisions violations, no seat belts. holy cow the'll hang the guy when stazis done with him ! :hysterically_laughi
shadowster
Well-Known Member
- Posts
- 1,372
- Location
- 55'38.4n.4'49.1w
he he he
CDB-Mark
New Member
- Posts
- 8
- Location
- Mook, The Netherlands
How about this suspension mod!!!
Mate of mine fitted parabolics. Also longer shackles with Range Rover axles. longers shocks and adapted props. RTI of almost 1000 now
Andput rear 109 spring on the front.. took some work (2 days and voila)
That hight on the pics is about 90 cm (35.4 inch)
Funny this is.. that it looks pretty normal on the road.
Will fit same mod on my 109 next year.
Mate of mine fitted parabolics. Also longer shackles with Range Rover axles. longers shocks and adapted props. RTI of almost 1000 now
Andput rear 109 spring on the front.. took some work (2 days and voila)
That hight on the pics is about 90 cm (35.4 inch)
Funny this is.. that it looks pretty normal on the road.
Will fit same mod on my 109 next year.
Last edited:
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
How about this suspension mod!!!
Mate of mine fitted parabolics. Also longer shackles with Range Rover axles. longers shocks and adapted props. RTI of almost 1000 now
Andput rear 109 spring on the front.. took some work (2 days and voila)
That hight on the pics is about 90 cm (35.4 inch)
Funny this is.. that it looks pretty normal on the road.
Will fit same mod on my 109 next year.
Have you got revolver shackles on that?
thats preety good for a 109"
CDB-Mark
New Member
- Posts
- 8
- Location
- Mook, The Netherlands
No revolver shackles.. It has even got the short ones at the back.. will change them to long ones next week when the new shocks will be fitted.
F4-BE5-6250-H5
Travel 14.30
valving
255/70
Ext. Lenght
34.90Coll.
lenght
20.75 $75.70
More mods next year.. when the toyota landcruiser powersteering will be fitted. And Orion Transfercase kit. I have fitted the 3B
(3.4 ltr Diesel) landcruiser engine with gearbox. .
My setup now:
TOYOTA H41 GEARBOX WITH 3.54 DIFF
.................High range........Low range
first..........:17.43................:34.16
second......: 9.36................:18.34
third..........: 5.38................:10.54
fourth.........: 3.54...............: 6.94
And setup will be with kit:
TOYOTA H41 GEARBOX WITH 3.54 DIFF en ORION 4:1 Tcase
.................High range........Low range
first..........:17.43................:69.72
second......: 9.36................:37.44
third..........: 5.38................:21.52
fourth.........: 3.54...............:14.16
http://advanceadapters.com/product/2437/Toyota-Land-Cruiser-Orion-Transfer-Case-Kit.html
F4-BE5-6250-H5
Travel 14.30
valving
255/70
Ext. Lenght
34.90Coll.
lenght
20.75 $75.70
More mods next year.. when the toyota landcruiser powersteering will be fitted. And Orion Transfercase kit. I have fitted the 3B
(3.4 ltr Diesel) landcruiser engine with gearbox. .
My setup now:
TOYOTA H41 GEARBOX WITH 3.54 DIFF
.................High range........Low range
first..........:17.43................:34.16
second......: 9.36................:18.34
third..........: 5.38................:10.54
fourth.........: 3.54...............: 6.94
And setup will be with kit:
TOYOTA H41 GEARBOX WITH 3.54 DIFF en ORION 4:1 Tcase
.................High range........Low range
first..........:17.43................:69.72
second......: 9.36................:37.44
third..........: 5.38................:21.52
fourth.........: 3.54...............:14.16
http://advanceadapters.com/product/2437/Toyota-Land-Cruiser-Orion-Transfer-Case-Kit.html
Similar threads
