hi what engine will fit into my series 3 without any cutting or rewelding and can be done over a weekend ? my series engine is low on compression and going to use it till im off over crimbo and my plan is to put another engine in over crimbo seen a few defender 90 2.5 dervs but will they fit without any mountings getting moved etc cheers
series 3 engine
- Thread starter saxokid18
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
is urs a diesel?
yes 2.5's will fit but need some of the original manifolds and stuff keeping
yes 2.5's will fit but need some of the original manifolds and stuff keeping
200 tdi
14j or 15j 2.5 Na from either a sherpa 350/400 or a fx4 taxi
the 12j 2.4 n/a or the 19j turbo needs the drivers side mounting altering to fit
a 14j or 15j can use manifolds from a 2.25, but mine has a modified front pipe and uses the manifolds that came with the engine.
14j or 15j 2.5 Na from either a sherpa 350/400 or a fx4 taxi
the 12j 2.4 n/a or the 19j turbo needs the drivers side mounting altering to fit
a 14j or 15j can use manifolds from a 2.25, but mine has a modified front pipe and uses the manifolds that came with the engine.
