Series 2A
Active Member
- Posts
- 132
- Location
- clevedon,Brizzel, North zumerzet
Hi all just a quick one,what oil has to be used in the steering box on my 2a would ep90 be ok also whats the best way to top up me gearbox any info would be great 
series 2a steering box
- Thread starter Series 2A
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,115
- Location
- Gloucestercotshirewolds
Yep EP90 everywhere but the engine...
I use a 1l gearbox oil bottle with a spout on.....extended the spout with some pipe to make it easier and fill through the level hole
I use a 1l gearbox oil bottle with a spout on.....extended the spout with some pipe to make it easier and fill through the level hole
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
cv grease is better leaks less (one shot swivel grease same thing)
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,115
- Location
- Gloucestercotshirewolds
Really....? Dint know cv and one shot are the same.....interesting
Series 2A
Active Member
- Posts
- 132
- Location
- clevedon,Brizzel, North zumerzet
thanks now on my "to do list" for tomorrow cheers
rustyrhinos
Well-Known Member
- Posts
- 2,625
- Location
- Stamford, Lincs
Perhaps I should use something thicker than EP90...because when I do, it comes out the bottom minutes later oops.
oops.John Goldie
Member
- Posts
- 26
- Location
- California
Aloha
Any more reports or updates on using CV grease instead of EP90? I like the idea of it dripping less.
Thanks!
John G
Any more reports or updates on using CV grease instead of EP90? I like the idea of it dripping less.
Thanks!
John G
