Series 2 demister/hoses to smiths heater

Hi all

I'm removing the silly heaters put in to clear the windscreen but in doing so I will need new heater hoses and period demisters (are they like rocking horse sh#t?).
This is what I'm after any help would be amazing!!!


I'm after 26, 25, 23 and 24

well, as iv found with my series2 restoration, http://www.landyzone.co.uk/lz/f6/well-needed-restoration-my-series-2a-76144.html you can get the hoses from a fish shop, that sells pond pumps etc off a roll, for a few quid, the rests gunna have to come from a breakers / ebay or auto jumble etc, you might be able to get a complete rotten bulkhead with all this fitted easier than the parts on ther own, thers not many left at all, try john richards at hinstock, Welcome to John Richards Surplus | John Richards Surplus | John Richards Surplus - A Name You Can Trust! has sorted me out with right odd things in the past

Try here

CBS Online Ltd | Heating, Air-con and Ventilation

I may have the vents………

23 and 24 are just plastic flexi tube easy to get hold of online

Doc to the rescue................

If you don't get sorted with the vents, if you can send me whats left of the originals, I'll make you a pair of new ones exactly the same.

mad git said:

Doc to the rescue................

If you don't get sorted with the vents, if you can send me whats left of the originals, I'll make you a pair of new ones exactly the same.

Click to expand...

whats yer chosen matereal for making new vents

just fer the bling factor id be doing them out of brass plate if it were mine and polished up to look as good as rose gold

johnny curt 1 said:

whats yer chosen matereal for making new vents

just fer the bling factor id be doing them out of brass plate if it were mine and polished up to look as good as rose gold

Click to expand...

Yeah, brass is nice, but rose gold is gay in my book

I presume the fella is looking for original, so mild steel, but, I'll make 'em out tortoise shell if he wants

mad git said:

Yeah, brass is nice, but rose gold is gay in my book

I presume the fella is looking for original, so mild steel, but, I'll make 'em out tortoise shell if he wants

Click to expand...

hand carved in ebony with polished white marble vent bezzels and a brass rolled rope edging trim

a bit over the top but hell if its yer pride and joy do it classy :bounce::bounce:

For the hoses you can use those off an old Hoover, as they should just push on.

When you are refitting, put the longest hose into the manifold above the fan rather than as shown in your drawing.

Hope this helps.

Rose gold and ebony are lovely ideas I was thinking of diamonds with platinum mounts then the twinkle from the Diamonds bling the screen clean!
Oh there was not any vents the previous owner had put electric ceramic heaters in and unwired smiths heater!!!

Houghy84 said:

Oh there was not any vents the previous owner had put electric ceramic heaters in and unwired smiths heater!!!

Click to expand...

Argh, the scumbag heathen

Lmao

provide good guidline

In case anyone has them, I'm looking for the vents which are kind of 'U' shaped, that blow air either side of the wiper motors - to fit a '62 Series 2A. I just bought a round heater for my Landy, which was an optional extra back in '62 I believe.