Series 2/3 Swb Diesel wanted
- Thread starter Toyboy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i got this last week, needs more work than i can do on the road in front of the house 
so im gonna sell it again
its a 1978, 109 pickup shell chopped and modified to fit on a discovery chassis and all the running gear from a 200tdi disco.
it needs a bit of work to get it to the standard i want it, roll bar, truck cab fitted, defender arches, hi lift jack and front and back winches
EXTREME1978 LAND ROVER SERIES 3 109'' ON DISCO CHASSIS on eBay (end time 07-Jul-10 22:46:06 BST)
iv been told on another forum that
In order to retain the original registration mark:
* cars and car-derived vans must use:
The original unmodified chassis or unaltered bodyshell (i.e. body and chassis as one unit - monocoque); or a new chassis or monocoque bodyshell of the same specification as the original supported by evidence from the dealer or manufacturer (e.g. receipt).
And two other major components from the original vehicle - ie suspension (front & back); steering assembly; axles (both); transmission or engine.
If a second-hand chassis or monocoque bodyshell is used a car must pass an Individual Vehicle Approval (IVA) and light goods vans must have a enhanced single vehicle approval (ESVA) or single vehicle approval (SVA) test after which a ""Q"" prefix registration number will be allocated.
so im gonna sell it againits a 1978, 109 pickup shell chopped and modified to fit on a discovery chassis and all the running gear from a 200tdi disco.
it needs a bit of work to get it to the standard i want it, roll bar, truck cab fitted, defender arches, hi lift jack and front and back winches
EXTREME1978 LAND ROVER SERIES 3 109'' ON DISCO CHASSIS on eBay (end time 07-Jul-10 22:46:06 BST)
iv been told on another forum that
In order to retain the original registration mark:
* cars and car-derived vans must use:
The original unmodified chassis or unaltered bodyshell (i.e. body and chassis as one unit - monocoque); or a new chassis or monocoque bodyshell of the same specification as the original supported by evidence from the dealer or manufacturer (e.g. receipt).
And two other major components from the original vehicle - ie suspension (front & back); steering assembly; axles (both); transmission or engine.
If a second-hand chassis or monocoque bodyshell is used a car must pass an Individual Vehicle Approval (IVA) and light goods vans must have a enhanced single vehicle approval (ESVA) or single vehicle approval (SVA) test after which a ""Q"" prefix registration number will be allocated.
