Sensor on top of engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Am intruiged as to what the sensor is - the wires on mine are buggered. My disco has EDC but if the sensor is to do with EGR valve then I'll cut the wires as it's long gone!!
 
Its the coolant temp sensor for the dread EDC system.There are switched overides you can install as this is the sensor that tells the fly by wire injector pump to advance its timing for cold starts....and it can be the source of endless trouble.
Go back through my posts and find the info that other kind people have posted up!
 
No because its used as a coolant sensor in those lucky enough not to have EDC.....though due to the position they tend to melt,as does the wiring associated so someone may have cut it off to cure a short.
 
No because its used as a coolant sensor in those lucky enough not to have EDC......
So what does it do if you don't have EDC? I thought the sensor for the temp gauge was by the stat, as is the one that turns on the ac fans to aid cooling if things get too hot
 
its the temperature sensor for the EGR system, that along with the throttle position sensor on a non edc fuel pump will tell the EGR control unit the information it needs to position the EGR valve correctly.
 
On the non EDC version the sensor is used for the EGR, it won't let the EGR operate until the engine is up to operating temperature. On EDC modules it feeds the EDC with information which is then used for all sorts.

The coolant temp sensor for the gauge is down at the stat housing.
 
Thanks for confirming that :)

Well the other day the top of my EGR valve decided to part company with the rest of it so the EGR doesnt work anyway :D

Need to get round to removing it completely
 
Back
Top