Disco 3 (LR3) seat height

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gstuart

D3 Grandad
Full Member
Posts
30,035
Location
Kent
don't know if it's the same but found on the manual seats when u adjust the height it only goes up at the back , pushing u forward and found it takes support away from the back of ur legs and causes leg pain

bought a cheap electric base for £40 quid , as i see on the electric seats the frame is like a scissor effect

so will go up on all four corners

don't want to replace all the interior for leather as it comes out 2.5k second hand

what i'm going to try and do is put my cloth manual seat onto the electric seat base, in order i can have the height , forward and back movement

not sure if everything will line up , it needs a 6 x way switch , thinking of getting two switches and putting them in spare places on the centre console , extend the wires to them, will use some carling switches

don't think i will have to put any relays in, due to it will have them going to the seat ,

what do i think, or shall i keep takin the medication

was just thinking of a way that it will give me the all four corner height adjustment without all the nightmare and massive cost of replacing the seats

not sure, if say , i got electric front seats if i'm able to remove the leather covers and then put my cloth ones in its place

thks for taking the time reading this and hopefully u haven't thrown urself off the nearest bridge :eek:

just thinking in how to wire it up , a second hand 6 way switch are around £100 , thought a couple of switches and some wire £25 quid

if i fit switches could then just put my seat plastic surrounds back on, as the electric ones are silly money
 
Back
Top