Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Time for lunch and a tidy up
Scot and Ben
- Thread starter Marmaduke
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 21,134
- Location
- In the next Glen
'Ere are grandad
View attachment 201841
View attachment 201842
View attachment 201843
View attachment 201844
Started hailing just as I was finishing the last sidecos I wanted to get it painted
View attachment 201845
Now it's chucking it down
Looking good kid
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Even started on the axlesLooking good kid
I'm knackered now though and stink of iron filings
So time for a shower and a sit down
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Been to church this morning so not got a great deal done.
Chassis painted
And rear springs on
Diff seems pretty tidy
So that can get painted tomorrow and hopefully get some wheels on
Chassis painted
And rear springs on
Diff seems pretty tidy
So that can get painted tomorrow and hopefully get some wheels on
Hicap phill
Well-Known Member
- Posts
- 15,396
- Location
- Wiltshire
You smothering everything with copper slip or grease for future removal ?
Hicap phill
Well-Known Member
- Posts
- 15,396
- Location
- Wiltshire
Looking good though....
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Everything so far has been nylock so no
Looking forward to getting the wheels on now Hicap phill
Well-Known Member
- Posts
- 15,396
- Location
- Wiltshire
Put plenty of grease onto the bolts through the spring hangers
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Yes'm bossPut plenty of grease onto the bolts through the spring hangers
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Today's effort
After lots of wire brushing and painting i got the axle on and painted the brake shields and put 'em on with new nuts n bolts
Painted the hubs and drive members, rebuilt them with new bearings and new brake drums and shoes. Then a moment of great joy......
Got a wheel on
Then the other side
This is the furthest it's moved for years
Even managed to have a sweep up
Front springs are on and I'm knackered
That's me done in
Got to finish rebuilding the front axle now and chuck that on.....
Painted the hubs and drive members, rebuilt them with new bearings and new brake drums and shoes. Then a moment of great joy......
Then the other side
This is the furthest it's moved for years
Even managed to have a sweep up
Front springs are on and I'm knackered
That's me done in
Got to finish rebuilding the front axle now and chuck that on.....
blueovalcraig
Active Member
- Posts
- 148
- Location
- Rothesay, Isle of Bute
Fantastic work
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
It's getting there slowly
- Posts
- 21,134
- Location
- In the next Glen
Looking sweet
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Back to work tomorrowLooking sweet
- Posts
- 21,134
- Location
- In the next Glen
Back to work tomorrow
Now you've made a dent in it you will be itching to get back at it now you've got some luv back for it.
Shimsteriom
Master Procrastinator
- Posts
- 41,906
- Location
- Over Here
I hate to point this out but you appear to have two sodding great holes in your chassis!
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
It's to make it lightweightI hate to point this out but you appear to have two sodding great holes in your chassis!
View attachment 202090
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
I need some warmer weather so I can get some paint on itNow you've made a dent in it you will be itching to get back at it now you've got some luv back for it.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Goot the front axle on today...
Rebuilt the front hub and sheared a bolt off
Another one to rebuild
Another wheel on (bargain wolfs)
For the first time in about three years it's a rolling chassis
I'll get the bulkhead out of the shed tomorrow and give it the once over.....
Rebuilt the front hub and sheared a bolt off
Another one to rebuild
Another wheel on (bargain wolfs
)For the first time in about three years it's a rolling chassis
I'll get the bulkhead out of the shed tomorrow and give it the once over.....
Shimsteriom
Master Procrastinator
- Posts
- 41,906
- Location
- Over Here
Nice to see that you've found a use for those holes in the chassis
