Scot and Ben

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Marmaduke

Well-Known Member
Posts
9,771
Location
Near the land of 'Me Duck'
For starters I'm not one for 'naming' vehicles but as I've ended up buying 2 Series 2a's and one was 'named' Ben by the previous owner and it even says Ben in small letters on the number plate I've ended up calling the other one Scot as I drove to Scotland to buy it and it helps me differentiate between them when I'm talking to my wife about them (just before her eyes glaze over) .

So for starters Scot is a 1964 2a 2 1/4 petrol that I drove the best part of 800 miles to collect the other weekend, both are doer uppers and sell on, (I currently work up to 70 hours a week and it's ****e so the plan is work less and do up and sell 2a's in my spare time, that's the plan anyway). It cost me £750 and it's got new springs and shocks, engine and gearbox, hard top with cat flap rear door and a pretty decent looking chassis the bulkhead needs a little bit of work but is fairly solid. Anyways pics....

DSC_0097_zpszmpo6rsw.jpg


DSC_0094_zpss18qcukl.jpg


DSC_0095_zpswiqyy6ui.jpg


DSC_0096_zpsouqnpwts.jpg


DSC_0100_zpsb7iknmwt.jpg


DSC_0102_zpsy4jtm8zw.jpg


The wings and bonnet are in the shed and are pretty straight and sound. After trawling ebay and a couple of other websites for missing bits I came across an advert that just said 'Land Rover series 2a v8 with spare wings and gearbox £350 and after some ensuing monkey business that I wont bore you with I ended up hiring a trailer and buying it and it was only the other side of Birmingham so about 40 miles away. When I collected it I saw that both number plates had the name Ben on them and when I enquired who that was I was told it was the cars name. Pics of Ben when I collected it....

DSC_0123_zpsvzuyc62o.jpg


DSC_0124_zpszfgo6h01.jpg


DSC_0122_zpssbodkd3z.jpg


DSC_0125_zpsbjstcitm.jpg


Initially if the worse came to the worse I was going to break it and take the parts I needed to get Scot on the road and the ebay the rest but it's to good to do that so I now have two projects to go at. I started to strip Ben today as the chassis is rotten in places but nowhere as bad as I thought it would be

DSC_0164_zpskhxxqrwv.jpg


Gave it a quick scrape with a screw driver as you do and it looks like this

DSC_0168_zpsrffd27xy.jpg


I've got a bulkhead and a rear tub from a previous folly into 2a ownership so the plan is to repair the tub I've got lying around has it previously had a hole cut in it for a reversing headlamp and to repair the bulkhead, get it stripped and galvanised along with the front radiator panel and go from there so regular updates here we come
 
I envy you! Where did you find them both?

Edit: you found the v8 on eblag.

I never named any of my cars in the past but I did the landy lol


Goodluck with the restoration buddy! I've always fancied a series to mess around in but things like leaf springs put me off as I know naff all about them!

Keep the pics coming!
 
I've only named them to help differentiate between the two..

Stripped Ben on Saturday,

DSC_0176_zpsokzelbta.jpg


This was all the crap that fell off:D

DSC_0175_zpseq7zyfzb.jpg


Plenty of welding to do when it's Bens turn, there's some nice holes underneath as well but it's nothing that's not fixable

DSC_0170_zpspl6c9wq8.jpg


I think I'll be re-using the wiring loom on Scot to keep costs down, I'll also be repairing the front panel and getting it galvanised.

I'm on holiday next week:D so I've ordered some bulkhead repair panels for Scot as there's been some dodgy looking repairs done and I also want this galvanising

DSC_0098_zpsr8fcsmji.jpg


Roll on Saturday....
 
Holy thread revival Batman :oops:

Well Ben has been sold a while ago and scot or as I only have one now my 2a has been neglected for a while :(

But as I have sold my defender and my youngest lad has said he wouldn't mind driving it once he's passed his test then it's time to give it some attention.

It's been sat like this for over a year
DSC_0903.JPG

I've sourced a different tub that I've repaired the rear panels on and turned it around

DSC_0958.JPG


Bloody hard work that was using a high lift jack and wheel chocks and here it rests for a while

DSC_0960.JPG


Had to nip out for a while, when I got back I saw I'd left the keys in my lads moped on the drive :oops:

DSC_0959.JPG


Anyway I need to get hold of a trailer once the defender has gone and I've got some room, probably going to buy a knackered caravan and strip it for its chassis as I only need to use one four times and it'll cost me 45 quid a time to hire one :eek:

Plans are shotblast the chassis, galvanise it and the bulkhead and radiator panel. I'm pricing up galvanised door tops and bottoms :D

Don't know which way to go on the radiator front, old flat top, aluminium one or a brand new series 3 type?

Anyway some serious eBay perusing to do:p
 
What sort of trailer are you looking for?
IIRC you are just up the road from me and could borrow mine if it's suitable.
Seriously? I need to take the chassis to burton for shot blasting then collect it when it's done. Then take the chassis, bulkhead and a few other bits to Stoke for galvanising and then fetch it back when it's done. So it was either buy one then sell it when I'd done or buy a knackered caravan and strip it for its chassis.
 
I have a Brian James A-Max with a 3.6m * 1.76m bed. I think it's 2 tonne gross weight. You are welcome to use it :)
Just let me know when you want it as I'll have to get it back off a neighbour.
 
Think I've dodged a bullet :D

Striped the bulkhead and replaced most of the panels a fair while back and never used a jig or template. I actually did it in the tub:oops:

Today was the day of reckoning and I'll be honest I've been putting it off but it's dropped straight on:D get in....
DSC_0979.JPG


DSC_0978.JPG


It'll need a bit of fettling but a massive sigh of relief
 
Had a free day in the sunshine to have a mess so had a play.

Engine and gearbox lifted out
DSC_0986.JPG


DSC_0987.JPG


Get my personalised spanner out

DSC_0990.JPG

And strip the axles off

DSC_0991.JPG


DSC_0994.JPG


Had a 300 odd mile round trip last weekend for replacement lwb axles as there's loads of play in my diffs. The lwb diffs feel pretty good and the swivels are perfect so I'll be stripping all four down and swapping bits over.

Got to get this sponging thing out next
DSC_0988.JPG

And it's properly stuck tight, might have to introduce it to Mr Sledge and buy a replacement if it won't budge.

Four suspension bushes to remove as well but I can drill those out then sort a load out for shotblasting courtesy of Mr @greyhair 's recommendation of a place in Stoke.
 
Back
Top