Salisbury plain sun 25th nov
- Thread starter wiltshire landyman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
Ok meeting for 10am at costa coffee on the solstice park services on the a303
If your coming from yeovil way a303 go over countess roundabout the 1st one after stonehenge then take nxt sliproad on left then left at roundabout and left at nxt roundabout and nxt left at roundabout costa is on the left
Postcode is sp4 7sq
If u want my mobile num send me a pm
See u all on sunday. Rich
If your coming from yeovil way a303 go over countess roundabout the 1st one after stonehenge then take nxt sliproad on left then left at roundabout and left at nxt roundabout and nxt left at roundabout costa is on the left
Postcode is sp4 7sq
If u want my mobile num send me a pm
See u all on sunday. Rich
Cirrus
Wlm
Lilman
Oxonlandy
BB
Pikey
Robint
Boomer
ScratchyDom - 90%
Freddy 007 - so long as my gearbox is sorted
JNCE
Conquer
Series71/Series06 and Simon(robint sized workmate)
Will be up for a few hours anyways
Is likin series06
only if she behaves herself at school all week mindIs likin series06
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,287
- Location
- Gloucestercotshirewolds
Wlm
Lilman
Oxonlandy
BB
Pikey
Robint
Boomer
ScratchyDom - 90%
Freddy 007 - so long as my gearbox is sorted
JNCE
Conquer
Cirrus
Series71/Series06 and Simon(robint sized workmate)
And the natural order is re-established
You do realise S71..........yer gonna use fuel if you use yer Landy....
Jus sayin
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
Judging by past experience it willbe pushed most of the way so fuel will be savedWlm
Lilman
Oxonlandy
BB
Pikey
Robint
Boomer
ScratchyDom - 90%
Freddy 007 - so long as my gearbox is sorted
JNCE
Conquer
Cirrus
Series71/Series06 and Simon(robint sized workmate)
And the natural order is re-established
You do realise S71..........yer gonna use fuel if you use yer Landy....
Jus sayin
'91 Defender
New Member
- Posts
- 244
- Location
- Aylesbury
Is this going to be non-damaging?
The 101 is mid-engine conversion at the moment, so only have the Disco 2, complete with side steps, tow bar and road tyres
EDIT: I've read through properly, no scratchy lanes for me, this is supposed to be the nice car
The 101 is mid-engine conversion at the moment, so only have the Disco 2, complete with side steps, tow bar and road tyres
EDIT: I've read through properly, no scratchy lanes for me, this is supposed to be the nice car
Last edited:
not if the rac have anything to do with itWlm
Lilman
Oxonlandy
BB
Pikey
Robint
Boomer
ScratchyDom - 90%
Freddy 007 - so long as my gearbox is sorted
JNCE
Conquer
Cirrus
Series71/Series06 and Simon(robint sized workmate)
And the natural order is re-established
You do realise S71..........yer gonna use fuel if you use yer Landy....
Jus sayin
says the man whio doesn't get to a laning session
OxonLandy
Active Member
- Posts
- 574
- Location
- nr Abingdon, Oxon
so how are the conditions looking for sunday? nice and wet?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
Lets hope soso how are the conditions looking for sunday? nice and wet?
robint
Well-Known Member
- Posts
- 7,057
so how are the conditions looking for sunday? nice and wet?
that means ill have to get mine dirty then
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
that means ill have to get mine dirty then
1st time for everything😂
ScratchyDom
Well-Known Member
- Posts
- 1,151
- Location
- Norf Dorset
Front suspension: Done (thanks for the turrets Robin T, via Rattty's tent and BB and back to Robin)
Starter motor: Done (thanks for the motor BB...)
Chassis welding: Done (thanks to my mate down the road who did a cracking job fixing the cracking)
Breathers: Half done, should be finishing them tonight.
Just a couple of minor luxuries to get finished (headlights, splitting water hose) and I'm all ready to go..!
I'm guessing it's going to be a wet one!
Good luck with getting your back axle done before the rain comes in WLM..!
Starter motor: Done (thanks for the motor BB...)
Chassis welding: Done (thanks to my mate down the road who did a cracking job fixing the cracking)
Breathers: Half done, should be finishing them tonight.
Just a couple of minor luxuries to get finished (headlights, splitting water hose) and I'm all ready to go..!
I'm guessing it's going to be a wet one!
Good luck with getting your back axle done before the rain comes in WLM..!
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
Im gonna start it now so hopefully no rain
robint
Well-Known Member
- Posts
- 7,057
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
Yep all done. Just gotta mount cb aerial tomoro and a couple of other bits and im gd to go
ScratchyDom
Well-Known Member
- Posts
- 1,151
- Location
- Norf Dorset
Well done! Hope I am too....
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
thinking of calling mine the deliverance vehicle cos it's squealing like a piggy.
