RRC running

Series 2A · Jan 26, 2013

Thanks for all the advice folks the beasty is alive and kicking for now

Turned out to be dodgey dizzy cap. As for the coolant pressure i took the top hose of the rad which goes in to the top of engine. There was no water in there unlike last time i took it off water ****ed out. So could this be the thermostat. Thanks all

lorri789 · Jan 26, 2013

neato!

DC_ · Jan 27, 2013

Yep sounds like a blocked thermostat alright.

norseman · Jan 27, 2013

Glad you've got it sorted

Series 2A · Jan 27, 2013

Cheers guys, New thermostat fitted, seems to run alot better,Got an exhaust leak now on the manifold where it meets the block

thats rangerovers for you

DC_ · Jan 27, 2013

Careful you don't thread it, very soft Aluminium block as ye know

Series 2A · Jan 28, 2013

Well I'm wondering if the threads gone as bottom bolt I could undo with me hands. Done the bolt up for the time being til I get new gasket so will see if it comes loose again. If so can it be rethreaded

Datatek · Jan 28, 2013

Series 2A said:
Well I'm wondering if the threads gone as bottom bolt I could undo with me hands. Done the bolt up for the time being til I get new gasket so will see if it comes loose again. If so can it be rethreaded

Helicoil?

Series 2A · Jan 28, 2013

Helicoil? Whats that Datatek

Datatek · Jan 28, 2013

Series 2A said:
Helicoil? Whats that Datatek

It's a stripped thread repair system. Google it.

Series 2A · Jan 28, 2013

Ok will do thanks for info

RRC running

Series 2A

Active Member

lorri789

Well-Known Member

DC_

New Member

norseman

Well-Known Member

Series 2A

Active Member

DC_

New Member

Series 2A

Active Member

Datatek

Well-Known Member

Series 2A

Active Member

Datatek

Well-Known Member

Series 2A

Active Member

Similar threads