RRC running

Thanks for all the advice folks the beasty is alive and kicking for now
Turned out to be dodgey dizzy cap. As for the coolant pressure i took the top hose of the rad which goes in to the top of engine. There was no water in there unlike last time i took it off water ****ed out. So could this be the thermostat. Thanks all

neato!

Yep sounds like a blocked thermostat alright.

Glad you've got it sorted

Cheers guys, New thermostat fitted, seems to run alot better,Got an exhaust leak now on the manifold where it meets the block thats rangerovers for you

Careful you don't thread it, very soft Aluminium block as ye know

Well I'm wondering if the threads gone as bottom bolt I could undo with me hands. Done the bolt up for the time being til I get new gasket so will see if it comes loose again. If so can it be rethreaded

Series 2A said:

Well I'm wondering if the threads gone as bottom bolt I could undo with me hands. Done the bolt up for the time being til I get new gasket so will see if it comes loose again. If so can it be rethreaded

Click to expand...

Helicoil?

Helicoil? Whats that Datatek

Series 2A said:

Helicoil? Whats that Datatek

Click to expand...

It's a stripped thread repair system. Google it.

Ok will do thanks for info