RRC 3.9 Non Starter

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

IXI

New Member
Posts
2
Please help if u can.
I lost the spark on 2 pots which turned out to be dodgy leads. Now have a good spark at all plugs, and loads of fuel at all. But still wont fire up.
Any ideas much appreciated.
 
Pull all the plugs and take out the fuel pump relay and spin it over for a while if they are really wet as you bores will be wet too otherwise.

Or you could put the plugs in the oven to get hor , thats another old trick for this. I did the former on mine!
 
Pull all the plugs and take out the fuel pump relay and spin it over for a while if they are really wet as you bores will be wet too otherwise.

Or you could put the plugs in the oven to get hor , thats another old trick for this. I did the former on mine!


why the relay mate, lean over lift intertia switch, spin the engine till it tries to fire and soon as it stops trying push switch down and she will fire up. thats as long as the leads have been put back in correct order:D
 
Pull all the plugs and take out the fuel pump relay and spin it over for a while if they are really wet as you bores will be wet too otherwise.

Or you could put the plugs in the oven to get hor , thats another old trick for this. I did the former on mine!
========================================================
Thanks Fett.
Did all you said and it worked a treat. You brought back a man's sanity that was in tatters from a very dark place.
Cheers.
IXI
 
Back
Top