rr lower tailgate woes

S

steve

Guest

• Sep 26, 2005

• #1

hi guys does any one know if I can get chequerplate repair panel for the
lower tailgate on a rangerover classic, mines well tatty on bottom edge,
I know its a common problem but I've never seen any adverts for repair
pieces
ta S

 

B

beamendsltd

Guest

• Sep 26, 2005

• #2

In message <[email protected]>
steve <[email protected]> wrote:

> hi guys does any one know if I can get chequerplate repair panel for the
> lower tailgate on a rangerover classic, mines well tatty on bottom edge,
> I know its a common problem but I've never seen any adverts for repair
> pieces
> ta S

You'd only need an oblong cut to size - try your local steel stockholder
or facricator for an off-cut.

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Boycott the Yorkshire Dales - No Play, No Pay

 

S

steve

Guest

• Sep 26, 2005

• #3

beamendsltd wrote:
> In message <[email protected]>
> steve <[email protected]> wrote:
>
>
>>hi guys does any one know if I can get chequerplate repair panel for the
>>lower tailgate on a rangerover classic, mines well tatty on bottom edge,
>>I know its a common problem but I've never seen any adverts for repair
>>pieces
>>ta S
>
>
> You'd only need an oblong cut to size - try your local steel stockholder
> or facricator for an off-cut.
>
> Richard
thanks richard, should be able to suss something like that, just
wondered if anyone sold one ready cut
S

 

L

Lee_D

Guest

• Sep 26, 2005

• #4

"beamendsltd" <[email protected]> wrote in message
news:e19e66b04d%[email protected]...
> In message <[email protected]>
> steve <[email protected]> wrote:
>
>> hi guys does any one know if I can get chequerplate repair panel for the
>> lower tailgate on a rangerover classic, mines well tatty on bottom edge,
>> I know its a common problem but I've never seen any adverts for repair
>> pieces
>> ta S
>
> You'd only need an oblong cut to size - try your local steel stockholder
> or facricator for an off-cut.

I got mine off ebay which I used to decorate the rear bumper having
insulated it first from the bumper with wing beading. Same bit can be used
on the lower tailgate. About 2 inches high and a few beer tokens if I recall
correctly.


Lee D