rotten body mount
- Thread starter h28nvn
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
1st what do you mean by body mount??? defenders don't really have body mounts in the same sense as say a discovery does. the tub is bolted directly to the chassis out riggers and a couple of brackets at the front. there is also a length of channelling on each side that carries the footwell floorplates and if it's a CSW then they also carry the passenger footwells. So I think a picture or a better description will be needed in order to provide you with anymore help.
- Posts
- 83,232
- Location
- Embasinga stocæ
"Pikey to the rescue" 
his terms are quite reasonable, so I gather.
his terms are quite reasonable, so I gather
.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Am gonna be busy for a couple of weeks putting stud walls up and plasterboarding as well as a few other bits and pieces.
- Posts
- 83,232
- Location
- Embasinga stocæ
i dunno - yu try and get peeps work - an they throw it back in ya face . Ever heard of a diary?
. Ever heard of a diary?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Aye but I can't find a free day to fill it in.
Landy-ads
Active Member
- Posts
- 407
- Location
- Out the front, spanner in hand
If its a 110 CSW then there is a body cross member which is bolted to the chassis forward of the rear wheels - this holds the front part of the rear tub in place. Other than that you have outriggers and the rear crossmember which are all welded to the chassis. You can't bolt them on as they won't be strong enough to hold the weight and it will fail the MOT.
