right angle breather connectors

wickford90 · Jan 27, 2013

anyone know where i can get elbow breather connectors that fit in the axle, i can find pre td5 screw in ones but not the later ( **** ) push in ones. My rear one has come out and now have a diff full of crappy muddy water.

OxonLandy · Jan 27, 2013

eBay? tons of breather kits and bits n bobs on there

wickford90 · Jan 27, 2013

OxonLandy said:
eBay? tons of breather kits and bits n bobs on there

none have the push in ones, only want the elbows everything else is in place.

Paulmitchell1984 · Jan 27, 2013

none of them push into axle if thats what u mean..they screw into axle, then have push fittings for the pipe!

wickford90 · Jan 27, 2013

Paulmitchell1984 said:
none of them push into axle if thats what u mean..they screw into axle, then have push fittings for the pipe!

td5 are push in early ones screw in.
landrover 200/300tdi axle 90 degree breather fittings Gwyn Lewis 4x4 wading kit | eBay

craigyb · Jan 27, 2013

Paulmitchell1984 said:
none of them push into axle if thats what u mean..they screw into axle, then have push fittings for the pipe!

Mine do

freelance · Jan 27, 2013

you could try afs hydraulics at tabrums farm just off the woodham road, they have good supply of all sorts of fittings.

wickford90 · Jan 27, 2013

freelance said:
you could try afs hydraulics at tabrums farm just off the woodham road, they have good supply of all sorts of fittings.

they were my next option,bought silicone hose for my snorkel couple of months back from them.

papae44 · Jan 27, 2013

this will be what your after 6mm x 1/8 Bsp Plastic Push in Swivel Elbow Fitting with s/s claw b81 | eBay cheaper buying a wading kit seperate than to by a kit i found
if thats not your size then search for 'yoursize' pneumatic fitting

pressbrake · Jan 27, 2013

Leigh baxter ,Robert leonard industrial estate near southend have everything pneumatic and hydraulic at trade prices

wickford90 · Jan 28, 2013

papae44 said:
this will be what your after 6mm x 1/8 Bsp Plastic Push in Swivel Elbow Fitting with s/s claw b81 | eBay cheaper buying a wading kit seperate than to by a kit i found
if thats not your size then search for 'yoursize' pneumatic fitting

That screws into casing td5 are a push in. Thanks .

wickford90 · Jan 28, 2013

pressbrake said:
Leigh baxter ,Robert leonard industrial estate near southend have everything pneumatic and hydraulic at trade prices

Thanks, will give them a ring

mikeyt · Jan 29, 2013

Done a few of these lately ive been tapping them and using screw in 90 degree fittings

right angle breather connectors

wickford90

Well-Known Member

OxonLandy

Active Member

wickford90

Well-Known Member

Paulmitchell1984

Well-Known Member

wickford90

Well-Known Member

craigyb

New Member

freelance

Well-Known Member

wickford90

Well-Known Member

papae44

New Member

pressbrake

Well-Known Member

wickford90

Well-Known Member

wickford90

Well-Known Member

mikeyt

Active Member

Similar threads