Rev counter prob in RR classic

T

[email protected]

Guest

• Aug 26, 2006

• #1

can anyone tell me where the tacho gets its feed from? the manual isn't
clear. Mine isn't working at all. The + feed is fine as the other gauges
work but not the tacho. its on an 86 RR Classic 3.5 EFI
thanks

Jock

 

L

Lee_D

Guest

• Aug 26, 2006

• #2

[email protected]
<[email protected]> uttered summat worrerz funny
about:
> can anyone tell me where the tacho gets its feed from? the manual
> isn't clear. Mine isn't working at all. The + feed is fine as the
> other gauges work but not the tacho. its on an 86 RR Classic 3.5 EFI
> thanks
>
> Jock

Either the "-" terminal of the coil or the Alternator

HTH

Lee D

 

T

[email protected]

Guest

• Aug 26, 2006

• #3

thanks Lee, that may explain why there is a wire wrapped round my coil
terminal instead of having a plug on it. There is a couple of loose wires on
that loom too so i'll check these out as possibilities
cheers
Jock

 

J

Jack

Guest

• Aug 28, 2006

• #4

<[email protected]> wrote in message
news:[email protected]...
> can anyone tell me where the tacho gets its feed from? the manual isn't
> clear. Mine isn't working at all. The + feed is fine as the other gauges
> work but not the tacho. its on an 86 RR Classic 3.5 EFI
> thanks
>
> Jock

typically the rear of the alt.