Resetting The codes after fitting new abs sensors

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

swally76

New Member
Posts
5
Alright Guy's,

Can anyone help i've just had my abs sensors done on both front wheels, And i need to know if i will have to put the car back on the computer to reset the codes or will they go off nwhen the car is driven????????

Thanks in advance,

Swally
 
they should go out on their own ,sensors have to be carefully fitted as it is easy not to get them down properly especially with new o ring , also make sure abs ring is really clean as can accumilate grease and that wheel bearing is okay as slight movement will put light back on
 
swally76 said:
Alright Guy's,

Can anyone help i've just had my abs sensors done on both front wheels, And i need to know if i will have to put the car back on the computer to reset the codes or will they go off nwhen the car is driven????????

Thanks in advance,

Swally
Click to expand...

IMO u must plug it in if the ABS light was permanently on before, it wont go out by itself......and it might not extinguish after u erase the codes just when u drive it and exceed 5mph.
 
td5tool said:
they normally go out after the fault is fixed but it will still be logged on the ecu so will need clearing
Click to expand...
If there are faults logged then the light comes on when you turn on the ignition and goes out when you get to just over walking pace. If know faults are logged then the light comes on when you turn on the ignition, goes out, comes on again and then goes at when you get to just over walking pace. You don't need to plug it in to a computer to clear the faults, do a search on here and you will find the instructions to do it yourself
 
You must log in or register to reply here.

Similar threads

F
Disco 2 Weird rear abs sensors
Replies
15
Views
1K
sierrafery
sierrafery
H
D2 ABS Sensors
Replies
3
Views
392
sierrafery
sierrafery
kricktd5
L332 abs/ HDC
Replies
1
Views
873
Datatek
Datatek
02Disco2
Disco 2 Abs & TC lights but no fault codes
Replies
1
Views
328
sierrafery
sierrafery
Dieselmec 42
Front abs kicking on
Replies
3
Views
527
Mark Piercy
Mark Piercy
Back
Top