replacement intercool er hose kit ?

C

chopper007

Active Member

Posts

251

Location

near huddersfield

• Apr 27, 2013

• #21

looking at the pics from Defender 300.. and comparing them to the ones i just took..

it looks like the 'turbo 90 degree' pipe has been replaced on mind at some point with 2 bits of rubber hose and a short metal link..
looking at Defenders pic that should be 1 piece of hose all the way to the Turbo.. from the short hose..metal pipe part ?

 

C

chopper007

Active Member

Posts

251

Location

near huddersfield

• Apr 27, 2013

• #22

def no ERG i just looked again...and have the Metal Inlet manifold ontop of the engine....

so.. should i have 2 rubber sections then ?

the short one pictured.. and the 90 degree one... rather than 3 short bits of rubber...
are there silicone versions ? or should i just not bother.. and buy cheap rubber standard parts from Fleabay ?

 

Grit Valve

2000 4.6 Vouge

Posts

12,465

Location

Plaistow

• Apr 27, 2013

• #23

I give up !

Turbo bend rubber pipe to metal pipe metal pipe to short rubber hose short rubber hose to intercooler other end if intercooler to long rubber pipe long rubber pipe to air intake manifold either egr inbetween plastic egr like mine metal non egr this is the air intake either plastic or metal !!!

 

Grit Valve

2000 4.6 Vouge

Posts

12,465

Location

Plaistow

• Apr 27, 2013

• #24

chopper007 said:

def no ERG i just looked again...and have the Metal Inlet manifold ontop of the engine....

so.. should i have 2 rubber sections then ?

the short one pictured.. and the 90 degree one... rather than 3 short bits of rubber...
are there silicone versions ? or should i just not bother.. and buy cheap rubber standard parts from Fleabay ?

Click to expand...

What are you like 3 rubbers on all cars types short Bend on turbo short one as a joiner inbetween the intercooler and metal pipe and finally long bendy rubber one inbetween the intercooler and air manifold !

You sure you that you should touch it lol

 

C

chopper007

Active Member

Posts

251

Location

near huddersfield

• Apr 27, 2013

• #25

yr right...

maybe i should stick to washing my hair... oh wait.... i dont have any left...

thanks though guys... was clear as mud, and now is only slightly murky.. but i think i have it...

 

Grit Valve

2000 4.6 Vouge

Posts

12,465

Location

Plaistow

• Apr 27, 2013

• #26

chopper007 said:

yr right...

maybe i should stick to washing my hair... oh wait.... i dont have any left...

thanks though guys... was clear as mud, and now is only slightly murky.. but i think i have it...

Click to expand...

Ya