Replacement aerial base

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

L D Shakespeare

New Member
Posts
3
Location
Derbyshire
Hello all, could anyone help please? I've search this forum and other forums without luck.

I've snapped off my aerial, below the whip, so I have to replace the base. The XUC500150 base on mine is no longer available in this or other any other country. The part has been superseded by XUC100832, but it's a slightly different shape (rounded at the front, not square) so the rubber base doesn't fit underneath it. I can't find a rubber base for the new part either! I'm sure the headlining will get wet without one, so I'm not doing that. Any help much appreciated!
 
I just used a rear roof mount ariel from Halfords on mine. Fits perfectly. :)

DSC_0265_zpsjoi8truh.jpg
 
Thanks for the suggestions. LR Direct have sold out - you must have had the last one Nodge68. That looks good if I can't find one JC600. I'll try the scrap yard first, thanks GrumpyGel. I don't like those online scrap yard things, you get so many emails offering you stuff you didn't ask for. I'll have to put some miles in! Thanks again!
 
Thanks for the suggestions. LR Direct have sold out - you must have had the last one Nodge68. That looks good if I can't find one JC600. I'll try the scrap yard first, thanks GrumpyGel. I don't like those online scrap yard things, you get so many emails offering you stuff you didn't ask for. I'll have to put some miles in! Thanks again!

If I remember correctly, Rover 25/45 or MG ZR/ZS have the same ariel base. :)
 
Back
Top