Replacement 1/4 chassis - call for help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Griffdowg

Griffdowg

New Member
Posts
7,194
Location
Somewhere in Bristol
The rear cross member has gone on my 2a lightweight. ripped off by a lead footed TD5 owner when I got stuck out last time on the lanes. I admit the x member was rotten :eek: so had it coming I guess.

Picked up a new 1/4 chassis recently but ringing around a few places I cannot find anyone willing to take the work on :eek: chassis specialist is too old :rolleyes: local garage are busy with MOT's :rolleyes:

So can anyone recommend anyone in Bristol or close to North Bristol or alternatively help me replace it myself (I cannot weld) I can wield a spanner and I come complete with a tea fairy although space at mine will likely be limited to outside.

Any thoughts or suggestions?

Cheers Leafers,

G
 
Last edited:
If you're struggling, try a few local metal works /welding type places, if they are short on work they may be happy to do it if you'll strip it back for them.

You'll also find they will do a much much better job than most garages
 
I had the same problem. Local metal welder offer to do it for approx £300. I invested in a Stick welder, practised on some old metal until I had good results and did the job myself. Passed the MOT and 2 years later still OK. You can watch good training videos on youtube and get the basic gist. Terry
 
You must log in or register to reply here.

Similar threads

M
Desperate call for HELP
Replies
5
Views
564
Atomician
Atomician
B
Chassis replacement on Air Portable series 3
Replies
3
Views
2K
yfo866
yfo866
archwayanimal
Replacement 1/4 rear chassis
Replies
2
Views
494
archwayanimal
archwayanimal
J
Disco 4 (LR4) Discovery 4 issues
Replies
0
Views
283
Jed Trousers
J
dag019
Capstan winch information required please
2
Replies
24
Views
3K
steve2286w
steve2286w
Back
Top