Replaced my P38 diesel......now it won't start

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

boyracer46

New Member
Posts
22
Replaced my P38 BMW diesel engine with one from a BMW car eventually..went ok, with a hell of a lot of swapping bits over......now it turns over but won't start! Any ideas?:(
 
hi guys....right more info....ecu still on the car, as everything else apart from the pump. The original enine had sucked in water before I bought it so had to be replaced. I do have a T2 diagnostic system (complete with trolly and printer) with a shed load of boxes full of conections and shoe box full of software which I don't know how to use so it looks like I will have to have go at firing that up.
 
the pump came fitted to the engine so did work, I swapped all the engine wiring from the range rover though.
 
if i where you i would get in touch with irishrover he will sort you out i dont know where you are also a guy called andy is very good with this stuff
 
guy called andy is over your way. you will have to plug in go to fuel and have a look you will also have to do ecu to fuel pump. was the fuel pump off your engine still working? that could be easer way to go.
 
Bit OT, but ..

Is it my imagination or wasn't the BMW M51 unit somewhat redesigned for the P38 to cope with extreme angles re. oil circulation etc.?
 
You must log in or register to reply here.

Similar threads

K
P38 2.5TDI won't start
Replies
8
Views
740
Kelvin'D-MiC'
K
B
P38A Mistery problem
Replies
4
Views
525
Grrrrrr
Grrrrrr
M
Classic Range Rover Suffix D Starting Issues - Advice required please
Replies
6
Views
785
Datatek
Datatek
Joe varley
The dreaded 2.7 sport lol HELP
Replies
7
Views
606
Joe varley
Joe varley
S
Car won't start
Replies
3
Views
624
somewhere safe
S
Back
Top