Removing TD5 panhard rod

Hey guys,

I am replacing my steering box (and damper, and panhard rod bushes) at the same time, and wonder if someone could offer me a bit of advice.

What's the best way to hold the nuts that secure the panhard rod in place? The bolt head is nice and easy to access, but the nut is inside a little box bracket, that makes it impossible to get a socket on it, and the angle means i dont think I can get a spanner in either.

Advice appreciated :-D

Cheers,

David

Scratch this, had a closer look, and the nut is actually on the far side of the bracket, so I can get to it!

Thanks anyway ;-)