Removing shocks and turrents

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Taffy

Active Member
Posts
470
Location
Wrexham North Wales
Hello. My turrents has given away. Rust. Thus the top of shock struts is hotting the inner wing cover etc. I wonder can I remove them with touching the springs ? By removing the bottom nut of the struts then undo the four bolts of turrents and pull the whole thing out ? Possible ?
 
Yes but when the bolts on the turret rings shear off you need to pop the spring out to replace anyway.

It's a piece of pi#s to get the front spring in and out.
 
Will these bolts shear off on my 2005 Defender when l try to fit new shocks, or at this age do l have a chance of them being OK?
 
depends if they have ever been done in the past.

i got mine off on my 27 year old yolk....but then found a reciept saying the turrets and rings had been changed a few years previous for mot.
 
Thanks everyone. I was hoping not to touch the springs but looks like I will have to. In that case I will order galvanised turrets spring rings and retainers and bolts new shocks and springs. Might well. Lol
 
Back
Top