Removing rear lights help?

how do u take off the top rear lights on the mk1 freelander???

1 .. unscrew and remove the three 'torx' (T20) screws securing the light unit, and withdraw it for access to the bulbholders

Torx - Wikipedia, the free encyclopedia

~~

bulb replacement :

2 .. twist the relevant bulbholder anti-clockwise, and withdraw it from the rear of the light unit. the bulb is a bayonet fit in the holder, and can be removed by pressing it and twisting it in an anti-clockwise direction

3 .. refitting is the reverse of the removal procedure. check the condition of the foam seal on the body, and make sure it stays properly aligned as the light is fitted

~~~~~~~~

i got the surround things on them is that the bolts your on about or is it inside the boot sorry don't know much

Sent from my GT-I9100 using Tapatalk 2

Chappers12 said:

i got the surround things on them is that the bolts your on about or is it inside the boot sorry don't know much

Sent from my GT-I9100 using Tapatalk 2

Click to expand...

The rear light-protectors don't make any difference.

Just unscrew the 3 Torx-screws - be careful to note the position of the packing spacers.

Don't over-tighten the Torx-screws when replacing or you'll crack the lenses.

There is no access to the bulbs from inside.

Singvogel.

k r u able to get me a picture on the screws where they r, the protectors r screw onto the lense of the lights

Chappers12 said:

k r u able to get me a picture on the screws where they r, the protectors r screw onto the lense of the lights

Click to expand...

You can see them pretty clearly here

yea that where i got to screw my protection on, any idea how i get them off as they just spinning