TERRYDONTSURF
New Member
- Posts
- 65
Going to remove my pick up bed to steam clean and Raptor coat it.
Have ID 2 x Nut and bolt at each corner on front and about 5 or 6 across rear crossmember (130) , disconnect filler neck and lights, bish,bash,bosh.
Sound about right?
Is the loom on a multiplug or it a case of ####ing about cutting loom and putting a multiplug in myself or pulling all the wiring out of the lights?
Have ID 2 x Nut and bolt at each corner on front and about 5 or 6 across rear crossmember (130) , disconnect filler neck and lights, bish,bash,bosh.
Sound about right?
Is the loom on a multiplug or it a case of ####ing about cutting loom and putting a multiplug in myself or pulling all the wiring out of the lights?
