110 hi cap brake lights

chrisstdt · Feb 21, 2019

300 tdi 110 hi cap brake lights have stopped working ( no power getting to the units at the rear)

There is power getting to the switch at the pedal box and ive tested the switch on another landy and it works fine

Ive traced the wiring back as much as possible but cant see anything obviously wrong

Is there a multi plug somewhere in the loom that could of come loose or gotten corroded ?

Thanks

mojo247 · Feb 21, 2019

have you checked the fuses or bulbs? just to eliminate them!

chrisstdt · Feb 21, 2019

Sorry should of said the fuse is fine and the reverse light which is on the same fuse works
New bulbs too so i suspect a wiring fault between the pedal box and the rear clusters

Hicap phill · Feb 21, 2019

Have you got power from pedal?
Have you then got power to the multiplug into the loom?

This will then go straight to the rear
No other plugs in chassis.

If you want to prove the lights use the purple(permanent ) live to see if lights/holder ok

tottot · Feb 21, 2019

Multiplug is near the driver footwell before loom goes into chassis.

chrisstdt · Feb 21, 2019

Hicap phill said:
Have you got power from pedal?
Have you then got power to the multiplug into the loom?

This will then go straight to the rear
No other plugs in chassis.

If you want to prove the lights use the purple(permanent ) live to see if lights/holder ok

Yes i have power at the plug above the pedal box

I bridged the two wires and still no power to rear

chrisstdt · Feb 21, 2019

tottot said:
Multiplug is near the driver footwell before loom goes into chassis.

Thanks for that the plug must be hidden behind something but i shall dig it out and see if thats where the problem lies

110 hi cap brake lights

chrisstdt

Well-Known Member

mojo247

Active Member

chrisstdt

Well-Known Member

Hicap phill

Well-Known Member

tottot

Well-Known Member

chrisstdt

Well-Known Member

chrisstdt

Well-Known Member

Similar threads