Remote locking

si844 said:

our local locksmiths sell and program remotes, if u got one local they might b able to help

Click to expand...

discool said:

All disco's had remote locking when they left the factory.
What model year is your disco, as from VIN TA163104/TA501920 (around 1995 may be) discos had a two button fob with passive immobilisation so if your disco is after those vin's them the engine will not start without a fob unless theres been some diy modification to the syetem that is.

Before the VIN's disco's had a single button fob which is user programmable.

Click to expand...

discool said:

A single button fob then. Find them on ebay.
AMR2109 control unit remote locking 433 MHz is the LR part no. for a new one

Click to expand...

discool said:

Easy Ha ha this is what LR say. Have fun.

NOTE: New handsets are supplied in pairs.
If a new handset is required, it will require
initialisation to the ECU using the
following procedure:
1. Starting conditions: ignition off, doors unlocked,
bonnet switch depressed.
2. Carry out instructions 3. to 9. within 8 seconds.
3. Switch ignition ON.
4. Switch ignition OFF.
5. Lock doors.
6. Unlock doors.
7. Release bonnet switch.
8. Switch ignition ON.
9. Switch ignition OFF.
If alarm is correctly accessed, horn will sound and
LED will light. It is now possible to programme two
handsets of correct frequency to vehicle alarm ECU.
This must be carried out within two minutes.
10. Press and hold down button on first handset until
dash LED flashes.
11. Repeat instruction 10. for second handset.
12. The LED will extinguish if both handsets have
been initialised correctly.

Click to expand...