Recommended rear door lock

There's plenty of products on the market, so I was wondering what specific make and model anyone here had successfully fitted to their rear door?

For example: Stoplock HG 199-00 Stoplock Van Lock | eBay

I fitted domestic Chubb locks to my previous defenders. When I get around to it I'm gonna fit Enfield bolts to my current one

ratty said:

I fitted domestic Chubb locks to my previous defenders. When I get around to it I'm gonna fit Enfield bolts to my current one

Click to expand...

How did you fit domestic Chubbs? I'd have thought the barrels would be the wrong shape?

GreenLove said:

How did you fit domestic Chubbs? I'd have thought the barrels would be the wrong shape?

Click to expand...

Simples. fit the entire chubb lock assembly into the rear door as if you're setting it in a house door and set it up so that the dead bolt hooks in behind the door frame to the left of the rear door.

GreenLove said:

There's plenty of products on the market, so I was wondering what specific make and model anyone here had successfully fitted to their rear door?

For example: Stoplock HG 199-00 Stoplock Van Lock | eBay

Click to expand...

Got similar on back my transit. on back of a landy id suggest a steel spreader plate for extre strength and security.

ratty said:

Simples. fit the entire chubb lock assembly into the rear door as if you're setting it in a house door and set it up so that the dead bolt hooks in behind the door frame to the left of the rear door.

Click to expand...

I'm intrigued - a 5 pin Chubb with some serrated spools sounds attractive. Have you got an image, or could you please point me to an image of the type of Chubb you used?

egor8384 said:

Got similar on back my transit. on back of a landy id suggest a steel spreader plate for extre strength and security.

Click to expand...

Is a a steel spreader plate something I'd need to fabricate myself?

GreenLove said:

I'm intrigued - a 5 pin Chubb with some serrated spools sounds attractive. Have you got an image, or could you please point me to an image of the type of Chubb you used?

Click to expand...

Here ya go.:rofl:

You can just about see the lock cover on the back of my 300tdi too

GreenLove said:

Is a a steel spreader plate something I'd need to fabricate myself?

Click to expand...

Yes. But only needs to be some flat bar to spread load if some erk decises to have pop at it. But also good visual deterrant.

ratty said:

Here ya go.:rofl:

Click to expand...

Oh I see, it's a mortice lock, right?

GreenLove said:

Oh I see, it's a mortice lock, right?

Click to expand...

Yep

I'm gonna fit one (or two) of these to my current 110

Enfield Garage Door Lock Bolts | eBay

I fitted em to the lockers on my truck and they are wicked.