Can some one please give me some advise on inserting my pistons. In the workshop manual it states that "the dome shaped boss on the piston arm must face the front of the engine on the right bank of cylinders" is this standing behind the engine or in front of it? in the reference section of the manual it states that refering to the right and left is as if you are standing behind unless the engine and gearbox is removed then the front of the engine is the water pump end. 'Not much help'.
rebuilding 3.5 ltr v8
- Thread starter caibosh
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
FFS front is always end nearest the radiator so what is it ya struggling with????
1992lse
New Member
- Posts
- 861
- Location
- ontinyent spain
well the bellhousing is the rear of the engine, and the water pump is the front.
so if you stand at the rear of the engine then the right handside is on the right.
hope that helps
so if you stand at the rear of the engine then the right handside is on the right.
hope that helps
beebe
New Member
- Posts
- 71
- Location
- Beebe, Arkansas, USA
If you start doing it the wrong way it won't quite fit right, so you coud just try it both ways
Similar threads
