Rebel Steering Guards

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i've got a rebel steering guard on my series 3 and the quality is great, its 5 mm thing the welding is very good quality and it was coated in zinc. only problem is the top 2 mounting holes are not quite in line with the chassis holes, nothing a drill couldnt sort mind... definately worth £34 plus a head of postage!
 
Hi Guys

Sorry to bump this thread again....

I just received me steering guard, and am going to tackle fitting it tomorrow.

I had a quick look today and couldn't find an obvious way of fitting it (ie no threaded holes to bolt it into !)

I know that my landy has had a chassis replacement in its time (bob wood chassis IIRC)

How is the guard fitted on your landies ? I am thinking that I may have to drill the holes ?? hope not !

Cheers

Craig B
 
sounds like you will mate on my series 3 there where all ready 4 holes (2 on each side of the chassis) to bolt it into, get a decent drill bit and drill your own!!! then get some really long screws and put them all the way through the chassis and there you have it 1 fitted steering guard!
 
hyland770 said:
sounds like you will mate on my series 3 there where all ready 4 holes (2 on each side of the chassis) to bolt it into, get a decent drill bit and drill your own!!! then get some really long screws and put them all the way through the chassis and there you have it 1 fitted steering guard!
Click to expand...

I'm guessing that these guards bolt onto the spring hangers. I've seen 2 types of spring hangers on series 3s: One type have 2 holes in them and stretch back almost to the front X-member and the other type are shorter and don't have the holes. He may need to weld on a couple of brackets if he has the latter type of spring hanger.
 
Hi again guys,

Deffo no mounting holes for the guard on me landy.

Can some one take photos of one in situ to give me an idea where to mount it (to drill holes or create some sorta bracket) mounting/welding it under the bumper would be easiest but not the strongest place... I do want it the guard to be functional, not just for show :)

Thanks

Craig B
 
These are 2 different type of front spring hangers fitted to SIII chassis. I'm guessing that the steering guard has been designed to fit the one on the right. If I were you I would find some rectangular pieces of 5mm steel, drill mounting holes in them, bolt them to the steering guard, then position the guard in the correct position using a bottle jack. Next weld the mounting brackets to the chassis.

spring_hangers.jpg
 
Is rebel stuff OK? I saw one getting welded back together at Drumclog in September and it looked beat.

And what's with the no callers ****e? No address on their website. Do they hump ya for postage ebay stylee. £34 but £25 to post it :eek: Mind you better than £75 and 25 for post :D
 
got to wait til Jan. Damn kids expect presents and a steering guard won't cut it.

Bloody girls! :D
 
i got one on my disco and it is 5mm thick and welds look really good. i know its not a series but i am posting on the quality of the item. i have bashed mine about a far bit and its took it all with no visible splits to the welds or metal anywhere.
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Bezdonian
1993 200Tdi Defender 110 Sw for Sale (SOLD)
2 3
Replies
43
Views
8K
lynall
L
dag019
Recommend me a steering damper
2
Replies
21
Views
4K
v8250
v8250
dag019
Hypothetical project feasibility
Replies
17
Views
2K
FlyingPete
FlyingPete
C
New to Land Rovers... Help with steering & security please!!
Replies
5
Views
1K
brianp38dse
brianp38dse
Back
Top