Disco 2 Rearmost wiring loom

I have already asked this within my chassis replacement thread but thought it might reach a wider audience as a standalone thread.
Now - wiring.
I know that with the @fenders we have done at work it has been necessary to disconnect all rear-end electrics and feed the loom back along the old chassis, before reversing the procedure with the new one. A time consuming pita. Now I am hoping that someone will tell me that Landrover got clever with the D2 - and installed multi-blocks at each end of the chassis section - or at least at the rear end? Can't find any definitive info on this at all. Plenty of wiring diagrams - but none that deal with the layout. Anyone got a few pointers??
ta

The D2 has a chassis harness plugged into some connectors under the dash, the harness type depends on what systems are fitted (SLS, ACE or none): http://www.allbrit.de/UNI.cfm?PAGE=819528&SPRACHE=EN

Excellent. Looking at that it seems that by unclipping the harness from the chassis the electrics themselves can be left undisturbed! Happy days!