Rear wiper prob.

wir hunter · Dec 31, 2010

Hi,
When rear wiper is activated at stalk, it moves about 1/4 way down window then stops, only way to get it back is leave switched on at stalk and go to rear and manually help it back, it will do the 2 turns on window but needs help at same place each time, then need to run and switch off before it starts next cycle.
Any ideas ???
Cheers.

Datatek · Dec 31, 2010

Loose on the splines? Try tightening the retaining nut.

wir hunter · Jan 7, 2011

Retaining nut is tight, but when i select reverse gear and front wiper is on the rear wiper works perfect, could this be a fault with car computer?

Ridesafe · Jan 7, 2011

wir hunter said:
Retaining nut is tight, but when i select reverse gear and front wiper is on the rear wiper works perfect, could this be a fault with car computer?

Not always; if you're lucky might just be fusebox..........try that first! If that doesn't cure it then prolly BeCM

v8hotrodboy · Jan 7, 2011

Ridesafe said:
Not always; if you're lucky might just be fusebox..........try that first! If that doesn't cure it then prolly BeCM

I agree could be engine bay fuse box.

Rear wiper prob.

wir hunter

New Member

Datatek

Well-Known Member

wir hunter

New Member

Ridesafe

New Member

v8hotrodboy

Active Member

Similar threads